Testing wires, 1,5 m long with “alligator” type clips with the grip width of 25 mm

USB cable for connecting to power supply unit or PC

Carry case for the device and accessories

Testing wires, 3 m long with separated current “alligator” clamps and potential test probes

Testing wires, 1,5 m long with two-pin plug-in test probes

Testing wires, 3 m long with “alligator” type clips with the grip width of up to 40 mm

Testing wires, 3 m long with spring-loaded probe

Micromilliohmmeter IKS-1A is available in two kits: “Basic” and “Energetic”

Compact micromilliohmmeter IKS-1A is designed for rapid measurement of electric resistance to direct current, mostly of contact resistance of bolted and welded connections, sockets. The device allows measuring electric resistance of low-inductive and inductive circuits of machines and instruments in the range from 1 microohm to 200 Ohms.

The device can also be used for controlling the resistance of metallic bonding to evaluate reliability of the contact between different elements, forming electrical ground.

In devices produced since 2019, it is available the mode “AUTO Contact” which allows to start the continuous measurement process (when both hands are occupied by measuring probes).

The device is available in two modifications: «Basic» and «Energetic» (see the Completeness tab).

In the kit «Energetic» the device with extended functionality allows measuring winding resistance of transformers with the power of up to 1000 kVA in the electrical grids of 0,4-10 kV.

In the kit «Energetic» the device with extended functionality («AUTO IND» mode) allows to measure the resistance of transformer windings with power up to 1000 kVA in electrical grids of 0.4-10 kV. In addition, the device in this kit is supplied with testing wires, 3 m long with “alligator” type clips with the grip width of up to 40 mm.

Useful links: «Measuring the resistance of metal connections»

Category: Micro- and milliohmmeters

Описание

Wide range of applications::

Measurement of bolted, welded, contact resistances
Сontrol of the resistance of metallic bonding
Diagnostics of the windings of hybrid motor generators
Control of electric resistance of wheel pairs
In the kit «Energetic» the device allows measuring winding resistance of transformers with the power of up to 1000 kVA in the electrical grids of 0,4-10 kV

Distinctive features:

High accuracy of measurements in the whole range
“AUTO Contact” mode for starting a continuous measurement process (when both hands are occupied by measuring probes)
«AUTO IND» mode for measuring the resistance of transformer windings*
Built-in battery allows to do hundreds of measurements without recharging
Connection with a PC via USB-interface for charging the battery, setting up the device and conducting measurements
Little weight 0,25 kg and dimensions of 140х100х35 mm

*Only for the IKS-1A micromilliohmmeter in the «Energetik» kit

Range of electric resistance being measured	1 microohm to 200 Ohm
Permissible basic relative error of measurement does not exceed: - for subrange of up to 10 milliohm: ±(0,1+0,02(10/R-1))%, where R is a measured value of resistance, milliohm - for other subranges: ±0,1%
Current value	10 milliampere …1,2 А
Uptime, not more than	2 sec
Measurement time, not more than	3 sec
Dimensions of the device	140х100х35 mm
Weight without testing wires, not more than	0,25 kg
Ambient temperature, operational	from -20 to +55°С
Resolution display, pixels	128х64
Power supply	autonomous
Battery charge	from a 220 V, 50 Hz or from a PC USB port
One battery charge is enough to hold at least	160 measurements
"Long measurement" mode for inductive circuits and circuit breakers with integral current transformers. Measurements time in this mode is 10…20 seconds
The "AUTO Contact" mode for starting the continuous measurement process (when both hands are occupied by measuring probes)
The "AUTO IND" mode for measuring the resistance of transformer windings with power up to 1000 kVA *

*Only for the Micromilliohmmeter IKS-1A in the "Energetik" kit

«Basic» kit:

Photo	Name/product number	Application
	Measuring device 1 psc.
	Testing wires, 1,5 m long with “alligator” type clips with the grip width of 25 mm - 2 psc.
	USB cable for connecting to power supply unit or PC 1 psc.
	Power supply unit with USB-output 1 psc.
	Operational manual and passport 1 psc.
	Carry case for the device and accessories 1 psc.

«Energetic» kit:

Photo	Name/product number	Application
	Measuring device with extended functionality 1 psc.
	Testing wires, 3 m long with “alligator” type clips with the grip width of up to 40 mm - 2 psc.
	USB cable for connecting to power supply unit or PC - 1 psc.
	Power supply unit with USB-output 1 psc.
	Operational manual and passport 1 psc.
	Carry case for the device and accessories 1 psc.

Additional accessories:

Photo	Name/product number	Application
	Testing wires, 3 m long with separated current “alligator” clamps and potential test probes - 1 kit.
	Testing wires, 1,5 m long with two-pin plug-in test probes – 1 kit.
	Testing wires, 3 m long with “alligator” type clips with the grip width of up to 40 mm – 1 kit.
	Testing wires, 3 m long with spring-loaded probe - 1 kit.	For checking metal connections on filling stations
	Testing wires, 1,5 m long with “alligator” type clips with the grip width of 25 mm - 1 kit.